Productivity is combined with versatility also for the variable angle

Variable angle straight-line edging machine for processing flat or inclined edges: an extra wheel, specifically dedicated to edge polishing, to ensure perfect finishes and high productivity over time.

The straight-line edger model ELB 11/45 grinds the edge of the glass obtaining a very high quality of the flat edge and the 45° inclined edge.

The use of two polishing wheels increases the quality of the polishing, attesting to the results obtained through a polishing with liquid cerium. air adjustment of the spindles to optimize consumption and increase their life cycle while maintaining performance practically unchanged.

This allows the operator to operate in a simple way on the machine, avoiding continuous adjustments that the machine makes directly.

The extreme flexibility of this machine allows to obtain excellent results both in the processing of large monolithic plates, where the speed of the process is a priority, and when processing small plates, looking for a fine edge finish.

The ELB 11/45 models can be integrated into fully automated robotic systems. Discover more

Glass straight line edging machine Elb 11/45 icon FA - Bovone


The ELB 11/45 straight-line edger can be supplied in the fully automatic version

A several features to make the operator’s job easier and to further reduce costs of operation.

Over the last two years Bovone has developed the new range of automatic glass edging machines presenting the new ELB Fully Automatic series at Vitrum.

Bovone’s ELB FA automatic edging machines for glass bring, in fact, a significant improvement in the degree of automation of grinding machines that translates into greater productivity and quality without compromise.

Bovone develops these two aspects of production by acting on three main points:

Automatic wheel wear compensation

No more hassle for the operator to manage manually the wheel position to compensate the wear during production. The machine’s spindles are positioned on a motorized track managed by the main software that raises automatically the position of the wheel.

Quick wheel setup

The machine wheel change results easier and faster than ever. The spindle lowers automatically leaving space for the operator to easily change the wheel, then rising up and positioning autonomously in the correct setup position.

Wheel change warning

Changing the wheels at the right time is essential to make the most of the tool and obtain a constant level of finish. A visual and audible alarm on the machine alerts the operator when the grinding wheel needs to be replaced.

Need more information?

Contact us

Technical features

400V 50Hz
0,35 - 5,450°÷45° up to 12mm
65 x 65 - 85 x 85 - 105 x 105
from 12mm to 30mm
80 x 80 -100 x 100 - 150 x 150 - 90 x 200
3 - 30
(OPT. 60)
33kW 75A8400

Need more information?

Contact us

THREE GOOD REASONS to choose Bovone straight-line edging machines



Relying on Bovone technology means securing the productivity of your company. Reliable machines and a prompt and qualified service are the cardinal points of the Made in Bovone offer.



Bovone’s technological solutions are the result of significant investments in research and development. Knowledge of the world of glass, in which the company has been operating since 1954, guides production choices to constantly align them with the trends of the reference markets.



Quality without compromise: only in this way can quality coexist with production speed to guarantee excellent production performance and extremely high standards.


Bovone’s ELB series straight-line edging machines guarantee excellent performance: Bovone’s edge processing technologies integrate high and consistent quality finishes with high productivity.

> Request information

How to

The construction and design quality of the ELB series straight-line edging machines derives from the research and results achieved by Bovone in the production of beveling machines: a drastic increase in the performance delivered by the machines, a standard with which all players have had to deal.

> Request information

For What

For the processing of flat edge, miter and arrises: to be able to respond effectively to the varied demands of the target sectors, adding value to the production cycle and protecting margins.

> Request information

Request information

Fill out the following form for a question of any kind, for general or technical information and one of our collaborators will answer you as soon as possible!

* Required fields

    Sign me up for the Newsletter

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    are there any questions?

    Need expert advice or want more information about our products or services?

    You can write to us and we will be happy to help you and offer you our advice!

    contact us

    Subscribe to our Newsletter

    * All fields are required